What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 18.06.2025 18:46

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
what exactly is a ‘surge’ protector?
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
What does a fuse do?
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
One
In schematic diagrams this is the symbol for a fuse:
eight
Analysts revamp forecast for Nvidia-backed AI stock - TheStreet
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
[old diagram got deleted by accident]
What are you struggling with in your life? What would you like to have instead?
It seems Mohan does not understand the difference between a comment and an Answer.
First Sentence:
nine
How do I convince flat earthers that the earth is round?
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Here is a simplified AC power diagram.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Anthony says 1st HR made better by Red Sox win - ESPN
He then describes the function of a fuse.
The third is lightning and “how it gets conducted into a home.”
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
[image of Common-mode choke]
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
What are some life hacks for living on your own?
the problem then depends on "how fast does the fuse operate?".
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
(Dc diagram shown, AC is similar).
A fuse is a non-resetable over current circuit protector.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Upvotes:
Why does my penis look like a mushroom when it gets big?
Because the load is inductive, the current lags the voltage.(by a bit).
He then asserts :
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
A circuit breaker is similar, but is resettable.
What is lightning?
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
2024–10–10[John johnson John Johnson ]
These devices are installed between the “hot” and “neutral” and protective ground.
Edit 2024–10.
At least they know the answer if they wanted it.
This is 'the assistant's answer'
so, what happens?
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
The other is “what does a “fuse” do?”
This is the picture of an electronic coil of wire wound around a core of magnetic material.
I post the exact comment here.
But… the neutral is now “floating” because of the 1 ohm resistance.
But it can get overloaded, and no longer works.
This one hit behind the barn.
At one ohm, the resistor has a maximum of 1 watt power.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
There are three different concepts here that are getting confused.
The MOV will conduct when the voltage exceeds 50% of line voltage.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
He then describes Rainy Season and Lightning.
For this case there are devices called Metal oxide varistors (MOV).
Now when you have a certain ac resistance, then a current flows in a loop.
This is where the MOV conducts again, and dissipated the energy.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
One is “what exactly is in a ‘surge protector’ ? ”
The bolt then partially travels down the line to your home.
but I think this circuit , shows a few more pieces.
These are simplified answers to the original question, and does not change anything I wrote above.
2024–10–14 [Omar Gharbi Omar Gharbi ]
This is where this question deviates from being a 'generic' question, and becomes more specific.
An AC voltage/ current source, and an ac inductive load.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
So, the voltage could go up to 500 volts, and the fuse will not open up.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
but this device (an Inductor) … impedes the rapid changes in the current.
It also is a device that limits the change in current flow.
There are two important concepts here.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Barnstars:
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
a photo is worth a thousand words.
This device then solves the entire problem.
2024–10–16 [ OO OLAOYE OYEBODE ]